Cisco UCS 3223-16UP Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 80

background image

This unit is intended for installation in restricted access areas. A restricted access area can be accessed only
through the use of a special tool, lock and key, or other means of security. Statement 1017

Warning

Only trained and qualified personnel must be allowed to install, replace, or service this equipment.
Statement 1030

Warning

Each new fabric interconnect requires a license. For information on licensing, see the

Configuration Guide

for the version of Cisco UCS Manager that you are using. The configuration guides are available at the
following URL:

http://www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html

Note

Installation Options

You can install the Cisco UCS Fabric Interconnect chassis in a perforated or solid-walled EIA cabinet or an
open EIA rack (the Cisco R Series Rack is an ideal choice), using the rack-mount kit shipped with the chassis.
For instructions on installing the chassis using the rack-mount kit shipped with the chassis, see

Installing the

Cisco UCS Chassis or UCS Chassis in a Cabinet or Rack, on page 23

.

Airflow Considerations

The FI's cooling fans pull air front-to-rear. That is, air intake is on the fan side and air exhaust is on the port
side.

To ensure proper airflow, follow these guidelines:

• Maintain ambient airflow throughout the data center to ensure normal operation.

• Consider the heat dissipation of all equipment when determining air conditioning requirements. When

evaluating airflow requirements, take into consideration that hot air generated by equipment at the bottom
of the rack can be drawn in the intake ports of the equipment above.

• Ensure that exhaust airflow is unobstructed.

Chassis Weight

When lifting the system, follow these guidelines:

• Disconnect all power and external cables before lifting the system.

• Have two people to lift the system. The Cisco UCS 6332 weighs 22 pounds (9.9 kg). The Cisco UCS

6332 16-UP weighs 22.61 pounds (10.2 kg). The Cisco UCS 6454 weighs 25.9 pounds (11.7 kg)

• Ensure that your footing is solid and that the weight of the system is evenly distributed between your

feet.

Cisco UCS 6300 Series Fabric Interconnect Hardware Installation Guide

18

Installing the Cisco UCS 6300 Series Fabric Interconnect

Installation Options

«
...
18
19
20
21
22
...
»

Содержание UCS 3223-16UP

















































































Отзывы:

Нет отзывов

Похожие инструкции для UCS 3223-16UP

dominion kx III

Бренд: Raritan Страницы: 6

Бренд: Raritan Страницы: 5

DOMINION KSX II

Бренд: Raritan Страницы: 7

Бренд: Raritan Страницы: 2

Бренд: United Electric Controls Страницы: 6

Бренд: wavin Страницы: 4

Бренд: D-Link Страницы: 242

S5170-EI Series

Бренд: H3C Страницы: 46

Бренд: SIMON RWA Страницы: 3

QuantaMesh T1048-LB9

Бренд: QCT Страницы: 42

Бренд: Aube Technologies Страницы: 118

Бренд: HMS Networks Страницы: 16

Бренд: Top View Страницы: 2

Бренд: Black Box Страницы: 4

CN8000 KVM on the NET

Бренд: ATEN Страницы: 2

Бренд: socomec Страницы: 43

Бренд: KCC Страницы: 6

Бренд: Icy Box Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды