44
System Management Tools
Table 9
lists the tools that you can use to modify the software configuration on a UC 520 before or
while deploying the system or for performing routine, ongoing system maintenance.
Cisco Configuration Assistant
The Cisco Configuration Assistant is installed on a PC or laptop that is connected to the Cisco Unified
Series by direct connection to a PoE port on the front panel of the platform, by connection to the LAN,
or via VPN client.
Use the Configuration Assistant when staging a UC 520 to create and save the initial software
configuration or to customize the software configuration for deploying these configurations at a
customer site:
•
Single-site key system—Change the Voice System Type setting from PBX (default) to Key System
Configuration.
•
Internet Service Provider requires a WAN configuration other than DHCP—Change the Internet
Connection settings.
Table 9
System Management Tools
Management Tool
Description
Related
Information/Tasks/Procedures
Cisco Configuration
Assistant, page 44
Primary configuration
application for installing and
managing the UC 520. Allows
for administration of voice,
networking, and security
features.
See the Getting Started with
Cisco Configuration Assistant at
http://www.cisco.com/go/configa
ssist or
on the CD-ROM that
shipped with the product.
For information about using this
tool, see online help.
GUI for Cisco Unified CME
and Cisco Unity Express,
page 45
Web-based application customer
administrators to make routine
additions and changes associated
with employee turnover, such as
adding or changing phones and
voice mailboxes and managing
automated attendant scripts.
Logging Into Cisco Unified CME
and Cisco Unity Express GUI,
page 49
For information about using this
tool, see online help.
Cisco Unified CME Phone
User Page, page 45
Web-based application for phone
users to program a small set of
features on their phones.
Logging Into Cisco Unified CME
Phone User Page, page 49
For information about using this
tool, see online help.
