Cisco uBR900 Series, Настройка

Страница: 56 / 138

Command Reference
56 Cisco IOS Release 12.0(7)T
Command Reference
This section describes the following cable-modem interface commands for the Cisco uBR900 series
cable access router for Cisco IOS Release 12.0(7)T:
•
cable-modem compliant bridge
•
cable-modem downstream saved channel
•
cable-modem fast-search
•
cable-modem upstream preamble qpsk
•
cable-modem voip best-effort
•
interface cable-modem
•
show bridge cable-modem
•
show controllers cable-modem
•
show controllers cable-modem bpkm
•
show controllers cable-modem des
•
show controllers cable-modem filters
•
show controllers cable-modem lookup-table
•
show controllers cable-modem mac
•
show controllers cable-modem phy
•
show controllers cable-modem tuner
•
show controllers cable-modem
•
show interfaces cable-modem
All commands relating to VoIP applications are documented in the Cisco IOS Release 12.0
command references, or in
Voice over IP for the Cisco AS5300 , which can be accessed online or on
the Documentation CDROM by going to New Features in Cisco IOS Release 12.0(3)T .
All other commands used with this feature are documented in the Cisco IOS Release 12.0 command
references.
In Cisco IOS Release 12.0(1)T or later, you can search and filter the output for show and more
commands. This functionality is useful when you need to sort through large amounts of output, or if
you want to exclude output that you do not need to see.
To use this functionality, enter a show or more command followed by the “pipe” character ( | ), one
of the keywords begin , include , or exclude , and an expression that you want to search or filter on:
command | { begin | include | exclude } regular-expression
Following is an example of the show atm vc command in which you want the command output to
begin with the first line where the expression “PeakRate” appears:
show atm vc | begin PeakRate
For more information on the search and filter functionality, refer to the Cisco IOS Release 12.0(1)T
document,
CLI String Search .