Supported MIBs and RFCs
34
Cisco IOS Release 12.0(7)T
•
Cable-specific MIBs—These MIBs provide information about the cable interface and related
information on the Cisco uBR900 series cable access router. They include both
DOCSIS-required MIBs and Cisco-specific enterprise MIBs. If your network management
applications have not already been configured for the Cisco uBR900 series cable access router,
these MIBs must be loaded.
Cable-Specific MIBs
Table 4 shows the cable-specific MIBs that are supported on the Cisco uBR900 series cable access
router. This table also provides a brief description of each MIB’s contents and the Cisco IOS
software release in which the MIB was initially functional—earlier releases might have had
unsupported prototype versions of the MIB; later releases might have added new attributes and
functionality. Because of interdependencies, the MIBs must be loaded in the order given in the table.
Note
The names given in Table 4 are the filenames for the MIBs as they exist on Cisco’s FTP site
(ftp://ftp.cisco.com/pub/mibs/ or http://www.cisco.com/public/mibs). Most MIBs are available in
both SNMPv1 and SNMPv2 versions; the SNMPv1 versions have
V1SMI
as part of their filenames.
Table 4
Supported MIBs for the Cisco uBR900 Series Cable Access Router
MIB Filename
Description
Release
SNMPv2-SMI.my
SNMPv2-SMI-V1SMI.my
Specifies the Structure of Management Information (SMI) for SNMPv2, as
defined in RFC 1902.
12.0(4)XI
SNMPv2-TC.my
SNMPv2-TC-V1SMI.my
Defines the textual conventions as specified in pages 4, 10-11 of RFC 854.
12.0(4)XI
CISCO-SMI.my
CISCO-SMI-V1SMI.my
Specifies the Structure of Management Information (SMI) for Cisco’s
enterprise MIBs.
12.0(4)XI
CISCO-TC.my
CISCO-TC-V1SMI.my
Defines the textual conventions used in Cisco’s enterprise MIBs.
12.0(4)XI
IF-MIB.my
IF-MIB-V1SMI.my
Describes generic objects for the Layer 3 network interface sublayers. This
MIB is an updated version of MIB-II’s
if
table, and incorporates the
extensions defined in RFC 1229.
12.0(4)XI
CISCO-CABLE-SPECTRUM-MIB.my
CISCO-CABLE-SPECTRUM-MIB-V1SMI.my
Describes the spectrum management flap list attributes.
12.0(5)T1
DOCS-IF-MIB.my
DOCS-IF-MIB-V1SMI.my
Describes the DOCSIS-compliant Radio Frequency (RF) interfaces in cable
modems and cable modem termination systems. (This MIB is being updated
on a release basis to add RFC2670 support as needed.)
12.0(4)XI
DOCS-BPI-MIB.my
Describes the attributes for the DOCSIS-specified Baseline Privacy
Interface (BPI) on cable modems and the CMTS (available in an SNMPv2
version only).
12.0(5)T
CISCO-DOCS-EXT-MIB.my
CISCO-DOCS-EXT-MIB-V1SMI.my
Extends the DOCSIS standard RFI MIB (DOCS-IF-MIB)
with Cisco-specific extensions, such as QoS attributes and connection status
and other information regarding the cable modems and CPE devices
supported by the CMTS.
partial support:
12.0(4)XI
full support:
12.0(5)T1
CABLE-DEVICE-MIB.my
CABLE-DEVICE-MIB-V1SMI.my
Contains generic cable-related objects for DOCSIS-compliant cable
modems.
12.0(4)XI
Содержание uBR900 Series
Страница 138: ...Glossary 138 Cisco IOS Release 12 0 7 T ...
