manualshive.com logo in svg

Cisco TelePresence MX700, Справочное руководство

Cisco TelePresence MX700 - мощная видеоконференцсистема для крупных залов. Установочное руководство и руководство пользователя доступны для бесплатного скачивания на нашем сайте. Ознакомьтесь с подробной информацией о настройке и использовании этого продукта, скачав руководство с {веб-сайта}.

Поделиться
Скачать
background image

D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017. 

Copyright © 2017 Cisco Systems, Inc. All rights reserved. 

59

Cisco TelePresence MX700 and MX800

API Reference Guide

xConfiguration Conference MaxReceiveCallRate

Define the maximum receive bit rate to be used when placing or receiving calls. Note that this 

is the maximum bit rate for each individual call; use the Conference MaxTotalReceiveCallRate 

setting to set the aggregated maximum for all simultaneous active calls.

Requires user role: ADMIN
Default value: 6000

USAGE:

xConfiguration Conference MaxReceiveCallRate: 

MaxReceiveCallRate

where

MaxReceiveCallRate

: Integer (64..6000)

The maximum receive call rate (kbps).

xConfiguration Conference MaxTransmitCallRate

Define the maximum transmit bit rate to be used when placing or receiving calls. Note that this 

is the maximum bit rate for each individual call; use the Conference MaxTotalTransmitCallRate 

setting to set the aggregated maximum for all simultaneous active calls.

Requires user role: ADMIN
Default value: 6000

USAGE:

xConfiguration Conference MaxTransmitCallRate: 

MaxTransmitCallRate

where

MaxTransmitCallRate

: Integer (64..6000)

The maximum transmitt call rate (kbps).

xConfiguration Conference MaxTotalReceiveCallRate

This configuration applies when using a video system's built-in MultiSite feature (optional) to 

host a multipoint video conference.
Define the maximum overall receive bit rate allowed. The bit rate will be divided fairly among 

all active calls at any time. This means that the individual calls will be up-speeded or down-

speeded as appropriate when someone leaves or enters a multipoint conference, or when a 

call is put on hold (suspended) or resumed.

The maximum receive bit rate for each individual call is defined in the Conference 

MaxReceiveCallRate setting.

Requires user role: ADMIN
Default value: 6000

USAGE:

xConfiguration Conference MaxTotalReceiveCallRate: 

MaxTotalReceiveCallRate

where

MaxTotalReceiveCallRate

: Integer (64..6000)

The maximum receive call rate (kbps).

xConfiguration Conference MaxTotalTransmitCallRate

This configuration applies when using a video system's built-in MultiSite feature (optional) to 

host a multipoint video conference.
Define the maximum overall transmit bit rate allowed. The bit rate will be divided fairly among 

all active calls at any time. This means that the individual calls will be up-speeded or down-

speeded as appropriate when someone leaves or enters a multipoint conference, or when a 

call is put on hold (suspended) or resumed.

The maximum transmit bit rate for each individual call is defined in the Conference 

MaxTransmitCallRate setting.

Requires user role: ADMIN
Default value: 6000

USAGE:

xConfiguration Conference MaxTotalTransmitCallRate: 

MaxTotalTransmitCallRate

where

MaxTotalTransmitCallRate

: Integer (64..6000)

The maximum transmit call rate (kbps).

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xConfiguration

Содержание TelePresence MX700


















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TelePresence MX700

Panasonic DMC-SZ5K Basic Owner'S Manual preview
DMC-SZ5K
Бренд: Panasonic Страницы: 32
Panasonic DMC-LZ40 Basic Owner'S Manual preview
DMC-LZ40
Бренд: Panasonic Страницы: 2
Panasonic DMC-GH3KBODY Basic Owner'S Manual preview
DMC-GH3KBODY
Бренд: Panasonic Страницы: 104
Panasonic DMC-FX35A - Lumix Digital Camera Instrucciones Básicas De Funcionamiento preview
DMC-FX35A - Lumix Digital Camera
Бренд: Panasonic Страницы: 32
Panasonic DMC-SZ7K Basic Owner'S Manual preview
DMC-SZ7K
Бренд: Panasonic Страницы: 23
Samsung NX200 Manual Del Usuario preview
NX200
Бренд: Samsung Страницы: 149
Samsung NX10 Firmware Upgrade Manual preview
NX10
Бренд: Samsung Страницы: 2
Samsung NX10 Quick Start Manual preview
NX10
Бренд: Samsung Страницы: 88
Samsung NV40 - Digital Camera - Compact Manual Del Usuario preview
NV40 - Digital Camera - Compact
Бренд: Samsung Страницы: 100
Samsung NV40 - Digital Camera - Compact User Manual preview
NV40 - Digital Camera - Compact
Бренд: Samsung Страницы: 100
Samsung NV30 - Digital Camera - Compact Manual Del Usuario preview
NV30 - Digital Camera - Compact
Бренд: Samsung Страницы: 100
Samsung NV20 - Digital Camera - Compact Manual Del Usuario preview
NV20 - Digital Camera - Compact
Бренд: Samsung Страницы: 102
Samsung NV24 - HD Digital Camera Quick Start Manual preview
NV24 - HD Digital Camera
Бренд: Samsung Страницы: 144
Samsung NV10 - Digital Camera - Compact User Manual preview
NV10 - Digital Camera - Compact
Бренд: Samsung Страницы: 78
Samsung NV100HD User Manual preview
NV100HD
Бренд: Samsung Страницы: 87
Samsung L830 - Digital Camera - Compact User Manual preview
L830 - Digital Camera - Compact
Бренд: Samsung Страницы: 111
Samsung i8 Manual preview
i8
Бренд: Samsung Страницы: 128
Samsung L310W User Manual preview
L310W
Бренд: Samsung Страницы: 108

Бренды по названию

Популярные бренды

Загрузить еще бренды