Cisco T-Mobile HIPORT+, Руководство пользователя

Страница: 12 / 28

9
User Guide
Chapter 4
Configuration
Connect on Demand: Max Idle Time
You can configure
the to cut the Internet connection after it has been
inactive for a specified period of time (Max Idle Time) . If
your Internet connection has been terminated due to
inactivity, Connect on Demand enables the to
automatically re-establish your connection as soon as you
attempt to access the Internet again . To use this option,
select
Connect on Demand
. In the Max Idle Time field,
enter the number of minutes you want to have elapsed
before your Internet connection terminates . The default
Max Idle Time is
5
minutes .
Keep Alive: Redial Period If you select this option, the
will periodically check your Internet connection . If
you are disconnected, then the will automatically
re-establish your connection . To use this option, select Keep
Alive . In the Redial Period field, specify how often you want
the Router to check the Internet connection . The default
value is 30 seconds .
L2TP
L2TP is a service that applies to connections in Israel only .
Internet Connection Type > L2TP
Server IP Address
This is the IP address of the L2TP
Server . Your ISP will provide you with the IP Address you
need to specify here .
User Name and Password
Enter the User Name and
Password provided by your ISP .
Connect on Demand: Max Idle Time
You can configure
the to cut the Internet connection after it has been
inactive for a specified period of time (Max Idle Time) . If
your Internet connection has been terminated due to
inactivity, Connect on Demand enables the to
automatically re-establish your connection as soon as you
attempt to access the Internet again . To use this option,
select
Connect on Demand
. In the Max Idle Time field,
enter the number of minutes you want to have elapsed
before your Internet connection terminates . The default
Max Idle Time is
5
minutes
Optional Settings
Some of these settings may be required by your ISP . Verify
with your ISP before making any changes .
Optional Settings
Router Name Some ISPs require these names as
identification . You may have to check with your ISP to see if
your Internet service has been configured with a host and
domain name . In most cases, leaving these fields blank will
work .
Host Name and Domain Name Some ISPs require these
names as identification . You may have to check with your
ISP to see if your Internet service has been configured with
a host and domain name . In most cases, leaving these
fields blank will work .
MTU The MTU (Maximum Transmission Unit) setting
specifies the largest packet size permitted for network
transmission . To manually set a value, select Manual and
enter the value desired in the Size field . You should leave
this value in the 1200 to 1500 range . The default is Auto ,
which allows the to select the best MTU for your
Internet connection .
Network Setup
The Network Setup section allows you to change the
settings on the network connected to the ’s
Ethernet ports . Wireless Setup is performed through the
Wireless tab .
Router IP
The ’s Local IP Address and Subnet Mask are shown
here . In most cases, you should keep the defaults .
Local IP Address
Local IP Address
The default value is
192.168.29.1
.
Subnet Mask
The default value is
255.255.255.0
.
DHCP Server Setting
The can be used as a Dynamic Host Configuration
Protocol (DHCP) server for your network . A DHCP server
automatically assigns an IP address to each computer on
your network . Unless you already have one, it is highly
recommended that you leave the enabled as a
DHCP server .