12
User Guide
Chapter 4
Configuration
Setup > Advanced Routing
The
Advanced Routing
screen allows you to configure the
dynamic and static routing settings .
Setup > Advanced Routing > Router
Setup > Advanced Routing > Bridge
Advanced Routing
Operating Mode
If this is hosting your network’s connection to the
Internet, select
Router
. If another router exists on your
network, select
Bridge
.
Dynamic Routing
RIP
This feature enables the to automatically
adjust to physical changes in the network’s layout and
exchange routing tables with the other routers . The
determines the network packets’ route based on
the fewest number of hops between the source and the
destination .
Disabled
This option disables the dynamic routing
feature for all data transmissions .
LAN & Wireless
This option enables dynamic routing for
the LAN connection .
WAN (Internet)
This option enables dynamic routing for
the WAN side .
Both
This option enables dynamic routing for the WAN
and LAN connections .
Static Routing
A static route is a pre-determined pathway that network
information must travel to reach a specific host or
network . Use this feature to set up a static route between
the and another network (you can have up to 20
static routes) . To create a static route, alter the following
settings:
Select Set Number
Select the number of the static route
from the drop-down menu .
Delete This Entry
To delete a route, select its number
from the drop-down menu, and click this button .
Enter Route Name
Enter a name for the static route,
using a maximum of 25 alphanumeric characters .
Destination LAN IP
The Destination LAN IP Address is
the address of the remote network or host to which you
want to assign a static route . Enter the IP address of the
host for which you wish to create a static route .
Subnet Mask
The Subnet Mask determines which
portion of a Destination IP address is the network portion,
and which portion is the host portion .
Default Gateway
This is the IP address of the gateway
device that allows for contact between the and
the remote network or host .
Interface
Select LAN or WAN (Internet), depending on
the location of the final destination .
Show Routing Table
Click
Show Routing Table
to open
a screen displaying how data is routed through your local
network . For each route, the Destination LAN IP address,
Subnet Mask, Gateway, and Interface are displayed . Click
Refresh
to update the information . Click
Close
to exit this
screen .
Advanced Routing > Routing Table
When you have finished making changes to this screen,
click
Save Settings
to save the changes, or click
Cancel
Changes
to undo your changes . Help information is
available on the right side of the screen .
Содержание T-Mobile HIPORT+
Страница 1: ......
