Cisco SVP2000P страница 40 Скачать руководство пользователя

Страница: 40 / 51

SVP2000PP Business POE IP Phone User Manual

STEPHEN TECHNOLOGIES CO.,LIMITED

/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115

Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email: [email protected] / Url: www.stephen-tele.com

- 40 -

Save Config

will be saved, and be effective immediately. .

Backup Config

Right clicks on “Right click here…” and select “Save Target As….” then you will save the config

file in .txt format

Clear Config

user can restore factory default configuration and reboot the phone.

If you login as Admin, the phone will reset all configurations and restore factory default; if you

IAX2) and version number.

4.3.5.4. Update

You can update your configuration with your config file in this web page.

Update

Field name

explanation

Web Update

Click the browse button, find out the config file saved before or provided by manufacturer,

download it to the phone directly, press “Update” to save. You can also update downloaded

update file, logo picture, ring, mmiset file by web.

Server

Set the FTP/TFTP server address for download/upload. The address can be IP address or

Domain name with subdirectory.

Username

Set the FTP server Username for download/upload.

Password

Set the FTP server password for download/upload.

File name

Set the name of update file or config file. The default name is the MAC of the phone, such as

000102030405.

Notice:

You can modify the exported config file. And you can also download config file which includes several modules

that need to be imported. For example, you can download a config file just keep with SIP module. After reboot, other

modules of system still use previous setting and are not lost.

Type

Action type that system want to execute

：

1. Application update: download system update file

2. Config file export: Upload the config file to FTP/TFTP server, name and save it.

3. Config fie import: Download the config file to phone from FTP/TFTP server. The

configuration will be effective after the phone is reset.

Protocol

Select FTP/TFTP server

4.3.5.5. Account Config

You can add or delete user account, and change the authority of each user account in this web page

Содержание SVP2000P




















































Результаты поиска

Содержание SVP2000P

Отзывы:

Похожие инструкции для SVP2000P

Бренды по названию

Популярные бренды

Cisco SVP2000P, Руководство пользователя

Результаты поиска

Содержание SVP2000P

Отзывы:

Похожие инструкции для SVP2000P

Бренды по названию

Популярные бренды