Cisco SVP2000P страница 7 Скачать руководство пользователя

Страница: 7 / 51

STEPHEN TECHNOLOGIES CO.,LIMITED

/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115

Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email:

Handset

Headset

SVP2000P provide two Ethernet ports and a power adaptor. Also has two headset interfaces with RJ

Please refer to safety notes of this manual carefully before power adaptor is connected.

2. Initial connecting and Setting

2.1. Connect the phone

2.1.1. Connect to network

Step 1: Connect the IP Phone to the corporate IP telephony network. Before you connect the phone to the network, please

check if your network can work normally.

You can do this in one of two ways, depending on how your workspace is set up.

Direct network connection—by this method, you need at least one available Ethernet port in your workspace. Use the

Ethernet cable in the package to connect WAN port on the

Since this VoIP Phone has router functionality, whether you have a broadband router or not, you can make direct network

connect. The following two figures are for your reference.

Shared network connection—Use this method if you have a single Ethernet port in your workspace with your desktop

computer already connected to it. First, disconnect the Ethernet cable from the computer and attach it to the WAN port on

the back of your phone. Next, use the Ethernet cable in the package to connect LAN port on the back of your phone to your

desktop computer. Your IP Phone now shares a network connection with your computer. The following figure is for your

reference.

Step 2: Connect the handset to the handset port by the handset cable in the package.

Step 3: connect the power supply plug to the AC 5V adapter port on the back of the phone. Use the power cable to

SVP2000PP Business

/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115

/Fax:+86 755 89352612 / Email: [email protected] / Url: www.stephen-tele.com

Handset

Port type: RJ-9 connector

Headset

Port type: RJ-9 connector

Headset

Port type: 3.5mm jack

provide two Ethernet ports and a power adaptor. Also has two headset interfaces with RJ

Please refer to safety notes of this manual carefully before power adaptor is connected.

Connect the IP Phone to the corporate IP telephony network. Before you connect the phone to the network, please

You can do this in one of two ways, depending on how your workspace is set up.

by this method, you need at least one available Ethernet port in your workspace. Use the

Ethernet cable in the package to connect WAN port on the back of your phone to the Ethernet port in your workspace.

Since this VoIP Phone has router functionality, whether you have a broadband router or not, you can make direct network

connect. The following two figures are for your reference.

Use this method if you have a single Ethernet port in your workspace with your desktop

computer already connected to it. First, disconnect the Ethernet cable from the computer and attach it to the WAN port on

the Ethernet cable in the package to connect LAN port on the back of your phone to your

desktop computer. Your IP Phone now shares a network connection with your computer. The following figure is for your

andset port by the handset cable in the package.

connect the power supply plug to the AC 5V adapter port on the back of the phone. Use the power cable to

Business POE IP Phone User Manual

/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115

tele.com

- 7 -

provide two Ethernet ports and a power adaptor. Also has two headset interfaces with RJ-9 port and 3.5mm jack.

Connect the IP Phone to the corporate IP telephony network. Before you connect the phone to the network, please

by this method, you need at least one available Ethernet port in your workspace. Use the

back of your phone to the Ethernet port in your workspace.

Since this VoIP Phone has router functionality, whether you have a broadband router or not, you can make direct network

Use this method if you have a single Ethernet port in your workspace with your desktop

computer already connected to it. First, disconnect the Ethernet cable from the computer and attach it to the WAN port on

the Ethernet cable in the package to connect LAN port on the back of your phone to your

desktop computer. Your IP Phone now shares a network connection with your computer. The following figure is for your

connect the power supply plug to the AC 5V adapter port on the back of the phone. Use the power cable to

Содержание SVP2000P




















































Результаты поиска

Содержание SVP2000P

Отзывы:

Похожие инструкции для SVP2000P

Бренды по названию

Популярные бренды

Cisco SVP2000P, Руководство пользователя

Результаты поиска

Содержание SVP2000P

Отзывы:

Похожие инструкции для SVP2000P

Бренды по названию

Популярные бренды