Cisco SVP2000P страница 14 Скачать руководство пользователя

Страница: 14 / 51

STEPHEN TECHNOLOGIES CO.,LIMITED

/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115

Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email:

Field name

Network

Shows the configuration information on WAN and LAN port, including the connect

mode of WAN port (Static,

LAN port, ON or OFF of DHCP mode of LAN port.

Phone Number

Shows the phone numbers provided by the SIP LINE 1

The last line shows the version number and issued date.

4.3.1.2. Wizard

Field Name

Please select the proper network mode according to the network condition.

settings:

Static: If your ISP server provides you the static IP address, please select this mode, then finish Static Mode setting. If

you don’t know about parameters of Static Mode setting, please ask your ISP for them.

DHCP: In this mode, you will get the information fro

information artificially.

SVP2000PP Business

/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115

/Fax:+86 755 89352612 / Email: [email protected] / Url: www.stephen-tele.com

Status

Explanation

Shows the configuration information on WAN and LAN port, including the connect

mode of WAN port (Static, DHCP, PPPoE), MAC address, the IP address of WAN port and

LAN port, ON or OFF of DHCP mode of LAN port.

Shows the phone numbers provided by the SIP LINE 1-3 servers and IAX2.

The last line shows the version number and issued date.

Wizard

Explanation

Please select the proper network mode according to the network condition. SVP2000P provide three different network

If your ISP server provides you the static IP address, please select this mode, then finish Static Mode setting. If

you don’t know about parameters of Static Mode setting, please ask your ISP for them.

In this mode, you will get the information from the DHCP server automatically; need not to input this

Business POE IP Phone User Manual

/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115

tele.com

- 14 -

Shows the configuration information on WAN and LAN port, including the connect

DHCP, PPPoE), MAC address, the IP address of WAN port and

3 servers and IAX2.

provide three different network

If your ISP server provides you the static IP address, please select this mode, then finish Static Mode setting. If

you don’t know about parameters of Static Mode setting, please ask your ISP for them.

m the DHCP server automatically; need not to input this

Содержание SVP2000P




















































Результаты поиска

Содержание SVP2000P

Отзывы:

Похожие инструкции для SVP2000P

Бренды по названию

Популярные бренды

Cisco SVP2000P, Руководство пользователя

Результаты поиска

Содержание SVP2000P

Отзывы:

Похожие инструкции для SVP2000P

Бренды по названию

Популярные бренды