Setting up the Interfaces of the Services Ready Platform
Setting up the Wireless LAN
73
Services Ready Platform SRP 500 Series Administration Guide
4
Advanced Wireless for group SSID
AP Isolation
This option isolates all wireless clients and wireless
devices on your network from each other. Wireless
devices can communicate with the Services Ready
Platform but not with each other. To use this function,
select Enabled. AP Isolation is disabled by default.
Basic Rate
The Basic Rate setting is not actually one rate of
transmission but a series of rates at which the Services
Ready Platform can transmit. The Services Ready
Platform advertises its Basic Rate to the other wireless
devices in your network, so they know which rates will
be used. The Services Ready Platform will also
advertise that it will automatically select the best rate for
transmission. The default setting is Default, when the
Services Ready Platform can transmit at all standard
wireless rates (1-2 Mbps, 5.5 Mbps, 11 Mbps, 18 Mbps,
and 24 Mbps). Other options are 1-2 Mbps, for use with
older wireless technology, and All, when the Services
Ready Platform can transmit at all wireless rates. The
Basic Rate is not the actual rate of data transmission. If
you want to specify the Services Ready Platform's rate
of data transmission, configure the Transmission Rate
setting.
Transmission Rate
The rate of data transmission should be set depending
on the speed of your wireless network. You can select
from a range of transmission speeds, or you can select
Auto to have the Services Ready Platform automatically
use the fastest possible data rate and enable the Auto-
Fallback feature. Auto-Fallback will negotiate the best
possible connection speed between the Services
Ready Platform and a wireless client. The default is
Auto.
Field
Description