Setting up the Interfaces of the Services Ready Platform
Setting up the WAN Interface
51
Services Ready Platform SRP 500 Series Administration Guide
4
NOTE
Your Mobile Connection Mode must be set to Auto to use the Ethernet Connection
Recovery feature.
STEP 3
If necessary, enter an ethernet timeout value.
STEP 4
Choose a site on which to perform failover validation in the Failover Validation Site
area, either use the Services Ready Platform or enter the IP address for a custom
site.
STEP 5
If necessary, change the priority of the WAN interfaces by clicking the Up or Down
buttons.
STEP 6
Click Submit to save your settings.