![background image](http://html.mh-extra.com/html/cisco/spa922-ip-phone-with-switch/spa922-ip-phone-with-switch_user-manual_64992043.webp)
Using Basic Phone Functions
Putting a Call on Hold
Cisco Small Business IP Phone SPA9XX User Guide
42
3
Putting a Call on Hold
To put a call on hold, press the Hold button. A series of beeps indicates the call is
on hold.
Resuming a Call
To resume the call, press the flashing red line button for the call. If you have
multiple calls, all calls are put on hold except the active call.
Ending a Call
To end a call:
•
If you are using the handset, hang up.
•
If you are using the speakerphone, press the Speaker button.
•
If you are using the headset, either press the Headset button (wired) or replace
the receiver (wireless).
Transferring Calls
You can perform two types of transfers:
•
Attended—You call the person to whom you are transferring the call and
speak to them before transferring the call.
•
Blind—You transfer the call without speaking to the other party to which you
are transferring the call.