Configuring Dial Plans
Cisco Small Business WRP400 Administration Guide
50
3
Syntax for the Interdigit Short Timer
•
SYNTAX 1:
S
:s,
(
dial plan
)
Use this syntax to apply the new setting to the entire dial plan within the
parentheses.
•
SYNTAX 2:
sequence
Ss
Use this syntax to apply the new setting to a particular dialing sequence.
s:
The number of seconds; if no number is entered after
S
, the default timer of 5
seconds applies.
Examples for the Interdigit Short Timer
•
Set the timer for the entire dial plan.
EXAMPLE:
S:6,
(9,8<:1408>[2-9]xxxxxx | 9,8,1[2-9]xxxxxxxxx |
9,8,011xx. | 9,8,xx.|[1-8]xx)
S:6,
While entering a number with the phone off hook, a user can pause for up
to 15 seconds between digits before the Interdigit Short Timer expires. This
setting is especially helpful to users such as sales people, who are reading the
numbers from business cards and other printed materials while dialing.
•
Set an instant timer for a particular sequence within the dial plan.
EXAMPLE:
(9,8<:1408>[2-9]xxxxxx |
9,8,1[2-9]xxxxxxxxxS0
|
9,8,011xx. | 9,8,xx.|[1-8]xx)
9,8,1[2-9]xxxxxxxxxS0
With the timer set to 0, the call is transmitted automatically
when the user dials the final digit in the sequence.
Editing Dial Plans
You can edit dial plans and can modify the control timers.
Entering the Line Interface Dial Plan
This dial plan is used to strip steering digits from a dialed number before it is
transmitted out to the carrier.
STEP 1
Start Internet Explorer, connect to the Configuration Utility, choose
Voice > Admin
Login
. If prompted, enter the administrative login provided by the Service
