manualshive.com logo in svg

Cisco Small Business RV220W, Руководство администратора, Страница: 203 / 228

Поделиться
Скачать
Cisco Small Business RV220W Скачать руководство пользователя страница 203

Viewing the RV220W Status

Viewing the Port Triggering Status

Cisco RV220W Administration Guide

203

10

 

Click 

Refresh

 to obtain the latest information.

NOTE

When you click 

Refresh

, it can take up to 1 minute to obtain the latest information. 

This page lists all available LAN hosts in the LAN Hosts Table. For every host, the 
table lists the name, IP address, and MAC address.

Viewing the Port Triggering Status

Use the 

Status > Port Triggering

 page to view the status of port triggering.

To open this page: 

In the navigation tree, choose 

Status

 > 

Port Triggering Status

.

Click 

Refresh

 to obtain the latest information.

This page provides information on the ports that have been opened per the port 
triggering configuration rules. The ports are opened dynamically whenever traffic 
that matches the port triggering rules flows through them. The table displays the 
following fields:

•

LAN IP Address

—Displays the LAN IP address of the device which caused 

the ports to be opened.

•

Open Ports

—Displays the ports that have been opened so that traffic from 

WAN destined to the LAN IP address can flow through the router.

•

Time Remaining Seconds

—This field displays the time for which the port 

will remain open when there is no activity on that port. The time is reset 
when there is activity on the port.

Click 

Refresh

 to refresh the current page and obtain the latest statistics.

Viewing Interface Statistics

To view interface statistics, choose 

Status

 > 

Interface Statistics

. Click 

Refresh

 to 

obtain the latest information.

The Interface Statistics window displays the data transfer statistics for each 
interface. The following data is displayed: 

•

Interface

—Displays the interface name.

•

Tx Packets

—The number of IP packets going out of the interface.

Содержание Small Business RV220W





































































































































































































































Отзывы:

Нет отзывов