manualshive.com logo in svg

Cisco Small Business RV220W, Руководство администратора, Страница: 185 / 228

Поделиться
Скачать
Cisco Small Business RV220W Скачать руководство пользователя страница 185

Administering Your Cisco RV220W

Backing Up or Restoring a Configuration

Cisco RV220W Administration Guide

185

9

 

STEP  2

If you chose to use an NTP server, enter these settings in the 

NTP Server 

Configuration

 section: 

•

NTP Server Settings—

Choose one of these options:

-

Default NTP Server—

Choose this option to use a server from a 

pre-configured list of NTP servers for general use. Then choose a server 
from the 

Default NTP Server 

list.

-

Custom NTP Server—

Choose this option to specify an NTP server that 

is not included in the default list. Then enter the server address or fully-
qualified domain name.

STEP  3

If you chose to set the time manually, choose the year (YYYY), month (MMM), day 
(DD), hour (HH), minutes (MM), and seconds (SS) in the 

Set Time and Date

 section.

STEP  4

Click 

Save

 to save your settings, or click 

Cancel

 to reload the page with the 

current settings.

Backing Up or Restoring a Configuration

Use the 

Administration > Backup/Restore 

page to back up a configuration file for 

later restoration, to restore a previous backup file, or to copy a configuration file.

The router has two configuration files: the startup and the mirror. 

•

The Startup file is the configuration file that the router loads when it boots 
up. 

•

The Mirror file is the last known valid configuration saved within a 24-hour 
period. If the Startup configuration file fails for any reason, then the Mirror 
configuration file is used.

!

CAUTION

During a restore operation, do not try to go online, turn off the router, shut down the 
PC, or do anything else to the router until the operation is complete. This should 
take about a minute. When the test light turns off, wait a few more seconds before 
doing anything with the router.

Содержание Small Business RV220W





































































































































































































































Отзывы:

Нет отзывов