Cisco Small Business RV220W Скачать руководство пользователя страница 118

Страница: 118 / 228

Configuring Virtual Private Networks (VPNs) and Security

Configuring Advanced VPN Parameters

Cisco RV220W Administration Guide

118

Range

—Allows computers within an IP address range to connect to the

VPN. Enter the Start IP Address and End IP Address in the provided fields.
Enter the first IP address of the range in the

Start Address

field. Enter the

final IP address of the range in the

End Address

field.

Subnet

—Allows an entire subnet to connect to the VPN. Enter the

network address in the Start IP Address field, and enter the Subnet Mask
in the Subnet Mask field. Enter the subnet’s network IP address in the

Start Address

field. Enter the subnet mask, such as 255.255.255.0, in the

Subnet Mask

field. The field automatically displays a default subnet

address based on the IP address.

IMPORTANT:

Make sure that you avoid using overlapping subnets for

remote or local traffic selectors. Using these subnets would require
adding static routes on the router and the hosts to be used.

For example, a combination to avoid would be:

Local Traffic Selector: 192.168.1.0/24

Remote Traffic Selector: 192.168.0.0/16

STEP 3

In the

Split DNS

section, check the

Enable

box to allow the Cisco RV220W to find

the DNS server of the remote router without going through the ISP (Internet).
Otherwise, uncheck the box to disable this feature. If you enable Split DNS, also
enter these settings:

•

Domain Name Server 1—

Enter a Domain Name server IP address to

resolve the domain that you enter in the

Domain Name 1

field.

•

Domain Name Server 2—

Optionally, enter a Domain Name server IP

address to resolve the domain that you enter in the

Domain Name 2

field.

•

Domain Name 1—

Enter a domain name, which will be queried only using

the DNS server configured in the

Domain Name Server 1

field.

•

Domain Name 2—

Enter a domain name, which will be queried only using

the DNS server configured in the

Domain Name Server 2

field.

STEP 4

For a Manual policy type, enter the settings in the

Manual Policy Parameters

section. For more information, see

Manual Policy Example, page 121

•

SPI-Incoming, SPI-Outgoing

—Enter a hexadecimal value between 3 and 8

characters; for example, 0x1234.

•

Encryption Algorithm

—Select the algorithm used to encrypt the data.

Содержание Small Business RV220W





































































































































































































































Результаты поиска

Содержание Small Business RV220W

Отзывы:

Cisco Small Business RV220W, Руководство администратора, Страница: 118 / 228

Результаты поиска

Содержание Small Business RV220W

Отзывы: