Viewing the Device Status
Viewing Connected Devices
Cisco RV215W Wireless-N VPN Firewall Administration Guide
23
5
Viewing Connected Devices
The
Connected Devices
page displays information about the active devices
connected to the device.
The IPv4 ARP Table displays information from devices that have responded to the
device Address Resolution Protocol (ARP) request. If a device does not respond to
the request, it is removed from the list.
The IPv6 NDP Table displays all IPv6 Neighbor Discover Protocol (NDP) devices
connected to the device local link.
To view connected devices, choose
Status
>
Connected Devices
.
To specify the types of interfaces to display, select a value from the
Filter
drop-
down menu:
All—
All devices connected to the router.
Wireless—
All devices connected through the wireless interface.
Wired—
All devices connected through the Ethernet ports on the router.
WDS—
All Wireless Distribution System (WDS) device connected to the router.
Viewing Port Statistics
The
Port Statistics
page displays port detailed activity.
To view port statistics, choose
Status
>
Port Statistics
.
To cause the page to re-read the statistics from the router and refresh the page,
choose a refresh rate from the
Refresh Rate
drop-down menu.
To show the bytes in kilobytes (KB) and the numerical data in rounded-up form,
check
Show Simplified Statistic Data
and click
Save
. By default, byte data is
displayed in bytes and other numerical data is displayed in long form.
To reset the port statistics counters, click
Clear Count
.
