Using Advanced Phone Features
Using the Interactive Voice Response Menu on the Cisco SPA 501G
Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP)
64
4
111
Set a static IP address. Enter the address (use * to enter the “.” value),
then press #.
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.
NOTE
DHCP must be disabled to use this option; if DHCP is not
disabled, you receive an error message.
121
Set a netmask. Enter the address (use * to enter the “.” value), then press
#.
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.
NOTE
DHCP must be disabled to use this option; if DHCP is not
disabled, you receive an error message.
131
Set a gateway. Enter the address (use * to enter the “.” value), then press
#.
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.
NOTE
DHCP must be disabled to use this option; if DHCP is not
disabled, you receive an error message.
161
Set the address of the primary Domain Name Server (DNS). Enter the
address (use * to enter the “.” value), then press #.
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.
181
Set the IP multicast address (used by the Cisco SPA 9000 to
communicate with the IP phone). Enter the address (use * to enter the “.”
value), then press #.
To save, press 1. To review the value you entered, press 2. To re-enter,
press 3. To exit, press *.
7932
Enable or disable the web server. Press 1 to enable or 0 to disable, then
press #.
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.
723646
Enable or disables access to the administrative (admin) login on the web
interface. Press 1 to enable or 0 to disable, then press #.
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.
Number
Option
