Additional Configuration and Maintenance Tasks
72
Performance Route Processor Installation and Configuration Guide
OL-11656-01
Step 9
Press
Return
.
After some interface information displays, the prompt appears as follows:
Router>
Step 10
Enter the
enable
command to enter enabled mode.
The prompt changes to the following:
Router#
Step 11
Enter the
show start-up config
EXEC command to display the enable password
in the configuration file.
Step 12
Enter the
configure terminal
command at the EXEC prompt.
You are prompted as follows:
Router#
configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#
Change the configuration register value back to its original value (noted from
Step 3
.)
Change it to a value of 0x0102 (factory default) using the
config-register
0x
value
command.
Step 13
Press
Ctrl-Z
or type
end
to exit configuration mode.
Step 14
Reboot the router and enable it using the recovered password.
