Cisco Physical Access 1125 Appliance, Руководство пользователя

Страница: 25 / 42

3-7
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
Chapter 3 Rack Mounting the Cisco PAM 1125 Appliance
Rack Mounting the Cisco PAM 1125 Appliance
Figure 3-5 Attaching an L Bracket to a Center Post
211434
2
1
3
The following items are shown in Figure 3-5 :
1 L bracket 3 Front side of right center post
2
Rack screw
Installing the Chassis in the Rack
Caution
Lifting the chassis and attaching it to the rack is a two-person job. If needed, use an appropriate lifting
device. A fully loaded Cisco PAM appliance weighs approximately 13.9 kg (30.6 lbs.).
To mount the chassis on the rack, perform the following procedure:
Step 1
Locate one person at the front of the rack and one at the rear.
Step 2
Position the chassis so that the L brackets (see item 1 in Figure 3-6 on page 3-8 ) are inserted into the
chassis mounting brackets (see item 2 in Figure 3-6 on page 3-8 ).
Step 3
While one person supports the weight of the chassis, the other person must adjust the L brackets to fit
tightly into the chassis brackets (see item 3 in
Figure 3-6 on page 3-8 ).