Cisco Physical Access 1125 Appliance, Руководство пользователя

Страница: 32 / 42

3-14
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
Chapter 3 Rack Mounting the Cisco PAM 1125 Appliance
Rack Mounting the Cisco PAM 1125 Appliance
Figure 3-12 Front-Mounting the Chassis in the Rack
Ci
s
co Ph
y
s
ica
l Acce
ss
Ma
na
g
e r
1
8
7
8
64
Mounting the 1125 Appliance in a Four-Post Rack
Warning
When the appliance is installed in a rack and is fully extended on its slide rail, it is possible for the
rack to become unstable and tip over, which could cause serious injury. To eliminate the risk of rack
instability from extending the rail or in the event of an earthquake, you should affix the rack to the
floor.
The four-post slide rail kit consist of individual left and right slide rails. Figure 3-13 shows the some of
the features of the four-post slide rail.
This section contains the following topics:
•
Setting the Multi-Pin Adapters for Rack Type, page 3-15
•
Installing the Slide Rails into a Rack with Square Holes, page 3-16
•
Installing the 1125 Appliance into the Slide Rails, page 3-19
Note
Each rail consists of three pieces that slide to extend the rail to its full length. To access the features of
the innermost piece, such as the release levers (see
Figure 3-13 ), you must grasp the end of the innermost
piece and pull it firmly out of the piece that contains it.