Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning
Hazardous voltage or energy is present on the backplane when the system is operating. Use caution when
servicing.
Statement 1034
Warning
Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous
voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt
other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system
unless all cards, faceplates, front covers, and rear covers are in place.
Statement 1029
Warning
Parts List
The following parts are available in both the Policy Feature Card 4 kit and the Policy Feature Card 4XL kit.
•
One VS-F6K-PFC4= or VS-F6K-PFC4XL= policy feature card.
•
One packet of labels.
•
One disposable grounding wrist strap.
•
One bag of mounting screws.
Required Tools
These tools are required to perform the installation or removal of the Policy Feature Card 4 or Policy Feature Card 4XL:
•
Antistatic mat or foam pad to support the removed supervisor engine.
•
3/16-inch flat-blade screwdriver for the captive installation screws on the supervisor engine.
•
Number 1 Phillips screwdriver for the screws and cap nuts that fasten the policy feature card to the supervisor engine.
•
Your own ESD-prevention equipment or the disposable grounding wrist strap included with all upgrade kits, field-replaceable
units (FRUs), and spares.
Installation Guidelines
Observe the following cautionary guidelines when installing the Policy Feature Card 4 or Policy Feature Card 4XL:
3
