Cisco ONS 15327, Пользовательская документация

Страница: 25 / 559

Figures
xxiii
Cisco ONS 15327 User Documentation
June 2002
Figure 5-10 Setting BLSR properties
5-10
Figure 5-11 A three-node BLSR before adding a new node
5-12
Figure 5-12 A BLSR with a newly-added fourth node
5-14
Figure 5-13 A four-node BLSR before a trunk card switch
5-17
Figure 5-14 A four-node BLSR after the trunk cards are switched at one node
5-18
Figure 5-15 Deleting circuits from a BLSR trunk card
5-19
Figure 5-16 A basic four-node UPSR
5-21
Figure 5-17 A UPSR with a fiber break
5-21
Figure 5-18 An OC-3 UPSR
5-22
Figure 5-19 Layout of Node ID 0 in the OC-3 UPSR example (Figure 5-15)
5-23
Figure 5-20 Layout of Node IDs 1 – 3 in the OC-3 UPSR example (Figure 5-15)
5-23
Figure 5-21 Connecting fiber to a four-node UPSR
5-24
Figure 5-22 Using the span shortcut menu to display circuits
5-26
Figure 5-23 Switching UPSR circuits
5-27
Figure 5-24 An ONS 15327 with subtending rings
5-29
Figure 5-25 A UPSR subtending from a BLSR
5-30
Figure 5-26 A BLSR subtending from a BLSR
5-32
Figure 5-27 Configuring two BLSRs on the same node
5-33
Figure 5-28 A linear or UPSR connection between ONS 15454 and ONS 15327 nodes
5-34
Figure 5-29 ONS 15327 ring subtended from an ONS 15454 ring
5-34
Figure 5-30 A linear (point-to-point) ADM configuration
5-35
Figure 5-31 Verifying working slots in a protection group
5-36
Figure 5-32 Deleting a protection group
5-37
Figure 5-33 Converting a linear ADM to a UPSR
5-38
Figure 5-34 Converting a linear ADM to a BLSR
5-40
Figure 5-35 A path-protected mesh network
5-43
Figure 5-36 A PPMN virtual ring
5-44
Figure 6-1 Creating an automatically-routed circuit
6-3
Figure 6-2 Setting circuit routing preferences
6-4
Figure 6-3 Specifying circuit constraints
6-5
Figure 6-4 Creating a manually-routed circuit
6-6
Figure 6-5 A VT1.5 monitor circuit received at aDS-1 port
6-9
Figure 6-6 Editing UPSR selectors
6-11
Figure 6-7 Selecting the Edit Path Trace option
6-13
Figure 6-8 Setting up a path trace
6-14