Installing a HHHL GPU
Type B riser cages have one alignment pin for each PCIe connector. One pin is for the top connector, and the
other pin is for the bottom connector. Each pin catches a notch on the GPU bracket to correctly position the
GPU.
Use this task to install an HHHL GPU into a Type B riser.
Before you begin
Review the
GPU Replacement Guidelines and Limitations, on page 26
.
Step 1
Holding the HHHL GPU level, align it horizontally with the PCIe connector, making sure that the notch in GPU's PCIe
bracket aligns with the correct pin on the riser cage.
In the following illustration, the GPU is aligning with the bottom connector, so the bottom pin is used.
Step 2
Seat the GPU card into the PCIe socket securely.
You should feel the GPU snap into place when the connector seats into the PCIe socket.
Cisco UCS X440p PCIe Node Installation and Service Guide
36
Servicing the Cisco UCS X440p PCIe Node
Installing a HHHL GPU
