Cisco Nexus 5600 Series, Справочник

Страница: 380 / 480

376
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter I Commands
ipv6 pim bsr-candidate
ipv6 pim bsr-candidate
To configure the router as an IPv6 Protocol Independent Multicast (PIM6) bootstrap router (BSR)
candidate, use the
ipv6 pim bsr-candidate command. To remove a router as a BSR candidate, use the
no form of this command.
ipv6 pim [ bsr ] bsr-candidate if-type if-number [ hash-len hash-len ] [ priority priority ]
no ipv6 pim [ bsr ] bsr-candidate [ if-type if-number ] [ hash-len hash-len ] [ priority priority ]
Syntax Description
Defaults
The hash mask length is 126.
The priority is 64.
Command Modes
Global configuration mode
VRF configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Usage Guidelines
This command requires the Enterprise Services license.
Examples
This example shows how to configure a router as a BSR candidate:
switch(config)# ipv6 pim bsr-candidate ethernet 2/2
This example shows how to remove a router as a BSR candidate:
switch(config)# no ipv6 pim bsr-candidate
bsr (Optional) Specifies the BSR protocol RP-distribution configuration.
if-type Interface type. For more information, use the question mark (?) online help function.
if-number Interface or subinterface number. For more information about the numbering syntax
for your networking device, use the question mark (?) online help function.
hash-len
hash-len
(Optional) Specifies the hash mask length used in BSR messages. The range is from
0 to 128. The default is 126.
priority
priority
(Optional) Specifies the BSR priority used in BSR messages. The range is from 0 to
255. The default is 64.
Release Modification
5.0(3)N1(1) This command was introduced.