3-4
Administrator’s Guide for Cisco MeetingPlace Video Integration Release 5.3
OL-6280-01
Chapter 3 Installing Cisco MeetingPlace Video Integration
Before You Install
Step 4
Click the
Add
button.
The Add User dialog box appears.
Step 5
In the “User name” field, enter the name that you want the Cisco MeetingPlace Web Conferencing
server to use to log in to the Cisco IPVC MCU.
Step 6
In the “Access level” field, click
Administrato
r or
Operator
.
Step 7
In the Password field, enter the password that you want this user to have.
Step 8
In the “Confirm Password” field, enter the password that you want Cisco MeetingPlace to use.
Step 9
To disable the ability of this user to telnet into the Cisco IPVC MCU, uncheck
Enable for Telnet / FTP
.
Step 10
To save this user profile, click
Upload
.
Setting Cisco IPVC MCU Parameters Required to Support Cisco MeetingPlace
To use your Cisco IPVC MCU with Cisco MeetingPlace, you must configure certain Cisco IPVC MCU
parameters to provide video for Cisco MeetingPlace conferences.
For more information about configuring the Cisco IPVC MCU for operation, see
Cisco IP/VC 3511
MCU and Cisco IP/VC 3540 MCU Module Administrator Guide,
Version 3.2.
Step 1
Log in to the Cisco IP/VC Administrator of the Cisco IPVC MCU that you want the Cisco MeetingPlace
server to use.
Step 2
Choose
MCU
>
Settings
>
Basics
.
Step 3
In the MCU field, click
MCU
.
Step 4
In the “Number of SCCP ports” field, select a value for the number of ports that you want
Cisco CallManager to use that leaves ports available for Cisco MeetingPlace.
For example, for a 60-port Cisco IPVC MCU select 0, 15, 30, or 45.
Step 5
Click the
Conference Mgmt
button.
Step 6
Set the following parameters in the Conference Mgmt page:
a.
In the “External conference authorization policy” field, click
Authorize
.
b.
In the “Allow conference creation using” field, click
Scheduler, Web, Control API and dial-in
.
c.
In the “Allow conference joining using” field, click
Invite and dial-in
.
d.
In the “Dial-in conference terminates when” field, click
Last participant leaves
.
Step 7
Click the
Advance
button.
Step 8
We recommend that you check
Disconnect participants on communications (ICMP) failure
and click
Audio failure
in the “Disconnect on” field.
Step 9
To save these settings to memory, click
Upload
.
Setting the Audio Indication Interval (Optional)
If video participants join a conference that has not yet started, they must wait in the waiting room. To
play an announcement while participants wait, set the following parameter: