2-2
Cisco Media Gateway Controller Node Manager Installation Guide
OL-18332-04
Chapter 2 Installing Cisco MNM
Performing a New Installation of Cisco MNM
•
Cisco Element Management Framework (Cisco EMF) 3.2. This software has Cisco EMF Service
Packs 7, 7.1, and 7.2. Also included is ObjectStore 5.1, which provides the database management.
See the latest Cisco EMF 3.2 software patch and release note (an Acrobat PDF file, such as
CEMF3.2P7DepRelNote.pdf) at the following URL:
http://www.cisco.com/en/US/docs/net_mgmt/element_manager_system/3.2/release/notes/rn_3_2.h
tml
For all releases of 3.2 release notes, go to the following URL:
http://www.cisco.com/en/US/docs/net_mgmt/element_manager_system/3.2_service_pack_7/releas
e/notes/rn3_2sp7.html
•
CEMF Crypto Add-on Package Software
If you want to use SSH for secure communications with SSH-enabled network components,
download the CEMF Crypto Add-On package, which is available at
http://www.cisco.com/cgi-bin/tablebuild.pl/cemf-addon-3des
Download both the CEMF Crypto Add-on Package software and the CEMF Crypto Add-on Package
Installation Guide. You must have authorization to download cryptographic software. If you do not
have it, you are automatically redirected to an authorization request page.
•
CiscoView 6.1.8 (from LMS DVD—Solaris 10 only). Install CiscoView 6.1.8 if you want to manage
Cisco IP Transfer Point - LinkExtenders (Cisco ITP-Ls) or Cisco LAN switches (Cisco MNM uses
the CiscoView server as the management interface). Install CiscoView before you install Cisco EMF
and Cisco MNM. CiscoView 6.1.8 is part of the LMS 3.1 package. If you want to use other network
management applications in the LMS 3.1 package, you can purchase the complete LMS 3.1 product
and install it with the MGC Node Manager on the same Sun Server.
Note
If Cisco MNM coexists with CiscoView 6.1.8 on a Solaris 10 operating system, the version
of the Solaris operating system must be the November 2006 release or higher, and the
minimum recommended cluster patch levels are those released April 17, 2007.
•
Cisco VSPT. The Cisco VSPT version must support your version of the
Cisco PGW 2200 Softswitch software. If you are managing nodes with
Cisco PGW 2200 Softswitch hosts running different software versions, you can install multiple
VSPT versions. Cisco MNM automatically launches the correct version for the selected host.
For the latest VSPT patch, go to
http://www.cisco.com/cgi-bin/tablebuild.pl/vspt
For Cisco MNM release notes, go to
http://www.cisco.com/en/US/products/sw/netmgtsw/ps1912/prod_release_notes_list.html
Note
CD is the installation media for Cisco MNM, and DVD is the installation media for LMS 3.1 and
CiscoView 6.1.8.
X Terminal Software
You must have Reflection 7.2 or higher installed to access Cisco MNM from a remote workstation. See
the
“Task 10: Set Up the X Terminal Workstations for Remote Access” section on page 2-18
for more
information.
