Cisco ME-3600X-24CX Series Скачать руководство пользователя страница 31

Страница: 31 / 63

2-12

Cisco ME-3600X-24CX Series Switch Chassis Configuration Guide

OL-27620-01

Chapter 2 Configuring T1/E1 Interfaces

Troubleshooting E1 and T1 Controllers

•

Use a loopback somewhere in the link or network

•

Configure remote testing equipment to transmit the same BER test pattern at the same time

To run a BERT on an E1 or T1 controller, perform the following optional tasks beginning in global
configuration mode:

The following keywords list different BERT keywords and their descriptions.

Caution

2^11, 2^15, 2^20-O153, and 2^20-QRSS patterns are supported.

Both the total number of error bits received and the total number of bits received are available for
analysis. You can select the testing period from 1 minute to 24 hours, and you can also retrieve the error
statistics anytime during the BER test.

Note

To terminate a BER test during the specified test period, use the no bert command.

You can view the results of a BER test at the following times:

•

After you terminate the test using the no bert command

•

After the test runs completely

•

Anytime during the test (in real time)

Task

Command

Select the E1 or T1 controller and enter
controller configuration mode.

controller {e1 | t1} 0/number

•

number—Specifies the location of the
controller. The number range for T1 and E1 is 1
to 16.

Specify the BERT pattern for the E1 or T1
line and the duration of the test in minutes
(1 to 1440 minutes).

Note

2^11, 2^15, 2^20-O153, and
2^20-QRSS patterns are supported.

bert pattern {2^11 | 2^15 | 2^20-O153 |
2^20-QRSS} interval minutes

Exit configuration mode when you have
finished configuring the controller.

End

View the BERT results.

show controllers {e1 | t1} 0/number

Table 2-2

BERT Pattern Descriptions

Keyword

Description

2^11

Pseudo-random test pattern that is 2,048 bits in length.

2^15

Pseudo-random O.151 test pattern that is 32,768 bits in length.

2^20-O153

Pseudo-random O.153 test pattern that is 1,048,575 bits in
length.

2^20-QRSS

Pseudo-random QRSS O.151 test pattern that is 1,048,575 bits
in length.

Содержание ME-3600X-24CX Series
































































Результаты поиска

Содержание ME-3600X-24CX Series

Отзывы:

Бренды по названию

Популярные бренды

Cisco ME-3600X-24CX Series, Руководство пользователя

Результаты поиска

Содержание ME-3600X-24CX Series

Отзывы:

Бренды по названию

Популярные бренды