Cisco LINKSYS WRT54GX4 Скачать руководство пользователя | Manualshive

Страница: 59 / 92

background image

53

Appendix A: Troubleshooting
Frequently Asked Questions

Wireless-G Broadband Router with SRX400

20. I do not see a speed improvement while surfing wirelessly with my SRX equipment.

•

Your Internet connection is usually much slower than your wireless network with SRX equipment. This
equipment will not affect the speed of your Internet connection.

•

You will see the most improvements in transferring or streaming files from one computer to another in
your network.

•

Your network speed will slow down if you have mixed 802.11g and SRX clients. For maximum
performance, use all SRX devices on your network.

21. How do I turn on SRX on my router?

SRX is automatically turned on in Mixed and G-Only mode. There's nothing you need to do to utilize this
feature.

Frequently Asked Questions

What is the maximum number of IP addresses that the Router will support?

The Router will support up to 253 IP addresses.

Is IPSec Pass-Through supported by the Router?

Yes, it is a built-in feature that the Router automatically enables.

Where is the Router installed on the network?

In a typical environment, the Router is installed between the cable/DSL modem and the LAN. Plug the Router into
the cable/DSL modem’s Ethernet port.

Does the Router support IPX or AppleTalk?

No. TCP/IP is the only protocol standard for the Internet and has become the global standard for communications.
IPX, a NetWare communications protocol used only to route messages from one node to another, and AppleTalk, a
communications protocol used on Apple and Macintosh networks, can be used for LAN to LAN connections, but
those protocols cannot connect from the Internet to a LAN.

Does the Internet connection of the Router support 100Mbps Ethernet?

The Router’s current hardware design supports up to 100Mbps Ethernet on its Internet port; however, the Internet
connection speed will vary depending on the speed of your broadband connection. The Router also supports
100Mbps over the auto-sensing Fast Ethernet 10/100 switch on the LAN side of the Router.

What is Network Address Translation and what is it used for?

Network Address Translation (NAT) translates multiple IP addresses on the private LAN to one public address that
is sent out to the Internet. This adds a level of security since the address of a PC connected to the private LAN is
never transmitted on the Internet. Furthermore, NAT allows the Router to be used with low cost Internet accounts,

«
...
57
58
59
60
61
...
»

Содержание LINKSYS WRT54GX4





























































































Отзывы:

Нет отзывов

Похожие инструкции для LINKSYS WRT54GX4

Бренд: H3C Страницы: 41

LigoPTP 5-23 UNITY

Бренд: LogoWave Страницы: 14

Бренд: TP-Link Страницы: 2

Dual-Band Wi-Fi Kit 600

Бренд: BT Страницы: 6

Бренд: M-Life Страницы: 32

easyHOTSPOT WRT54GL

Бренд: Linksys Страницы: 17

Бренд: Samsung Страницы: 4

Бренд: Samsung Страницы: 5

LTE Mobile HotSpot PRO

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 12

Бренд: Samsung Страницы: 8

Бренд: Samsung Страницы: 26

Ubigate iBG1003

Бренд: Samsung Страницы: 48

HotSpot PRO V100T

Бренд: Samsung Страницы: 77

Бренд: Samsung Страницы: 140

Бренд: Silvercrest Страницы: 20

Бренд: Silvercrest Страницы: 66

MUSIC TO GO SKHL 40 A2

Бренд: Silvercrest Страницы: 175

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды