Cisco LINKSYS WRT54GX4 Скачать руководство пользователя | Manualshive

Страница: 36 / 92

background image

30

Chapter 5: Configuring the Wireless-G Broadband Router
The Applications and Gaming Tab - Port Triggering

Wireless-G Broadband Router with SRX400

The Applications and Gaming Tab - Port Triggering

Port Triggering is used for special applications that can request a port to be opened on demand. For this feature,
the Gateway will watch outgoing data for specific port numbers. The Gateway will remember the IP address of the
computer that sends a transmission requesting data, so that when the requested data returns through the
Gateway, the data is pulled back to the proper computer by way of IP address and port mapping rules.

Port Triggering

Application

. In this field, enter the name you wish to give the application.

Triggered Range and Forwarded Range

Start Port and End Port

. Enter the starting and ending port numbers of the Triggered Range and Forwarded

Range.

Enable

. Click the

Enable

checkbox to enable port triggering for the relevant application.

When finished making your changes on this tab, click the

Save Settings

button to save these changes, or click

the

Cancel Changes

button to undo your changes.

The Applications and Gaming Tab - DMZ

The DMZ feature allows one network user to be exposed to the Internet for use of a special-purpose service such
as Internet gaming or videoconferencing. DMZ hosting forwards all the ports at the same time to one PC. The Port
Range Forward feature is more secure because it only opens the ports you want to have opened, while DMZ
hosting opens all the ports of one computer, exposing the computer to the Internet.

Any PC whose port is being forwarded must have its DHCP client function disabled and should have a new static
IP address assigned to it because its IP address may change when using the DHCP function.

DMZ

To expose one PC, select

Enable

. Then, enter the computer's IP address in the

DMZ Host IP Address

field.

Change these settings as described here and click the

Save Settings

button to apply your changes or

Cancel

Changes

to cancel your changes.

Figure 5-30: Applications and Gaming Tab - Port

Triggering

Figure 5-31: Applications and Gaming Tab - DMZ

«
...
34
35
36
37
38
...
»

Содержание LINKSYS WRT54GX4





























































































Отзывы:

Нет отзывов

Похожие инструкции для LINKSYS WRT54GX4

WG602v3 - Wireless Access Point

Бренд: NETGEAR Страницы: 2

Rocket Prism AC GEN 2 RP-5AC-Gen2

Бренд: Ubiquiti Страницы: 28

Бренд: Linksys Страницы: 42

Бренд: TP-Link Страницы: 94

GKF 10.8V-8 Professional

Бренд: Bosch Страницы: 20

Бренд: Bosch Страницы: 103

Бренд: ausdom Страницы: 59

Бренд: Air Live Страницы: 72

Бренд: Jabra Страницы: 36

Бренд: Status Страницы: 28

Бренд: Status Страницы: 48

Бренд: High-Flying Страницы: 18

Бренд: VTel Wireless Страницы: 2

Бренд: Westermo Страницы: 21

Бренд: Mobotix Страницы: 102

Бренд: XD Страницы: 28

Бренд: LINK LABS Страницы: 14

Бренд: mobilerepeater Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды