Cisco LINKSYS WRT54GX4 Скачать руководство пользователя | Manualshive

Страница: 18 / 92

background image

12

Chapter 5: Configuring the Wireless-G Broadband Router
The Setup Tab - Basic Setup

Wireless-G Broadband Router with SRX400

•

Static IP

. If you are required to use a permanent IP address to connect to the Internet, select

Static IP

.

Internet IP Address

. This is the Router’s IP address, when seen from the Internet. Your ISP will provide you

with the IP Address you need to specify here.

Subnet Mask

. This is the Router’s Subnet Mask, as seen by users on the Internet (including your ISP). Your

ISP will provide you with the Subnet Mask.

Gateway

. Your ISP will provide you with the Gateway Address, which is the ISP server’s IP address.

Static DNS 1-3

. Your ISP will provide you with at least one DNS (Domain Name System) Server IP Address.

•

PPPoE

. Some DSL-based ISPs use PPPoE (Point-to-Point Protocol over Ethernet) to establish Internet

connections. If you are connected to the Internet through a DSL line, check with your ISP to see if they use
PPPoE. If they do, you will have to enable

PPPoE

.

User Name and Password

. Enter the User Name and Password provided by your ISP.

Connect on Demand: Max Idle Time.

You can configure the Router to cut the Internet connection after it has

been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated
due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as
soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio
button. In the

Max Idle Time

field, enter the number of minutes you want to have elapsed before your Internet

connection terminates.

Keep Alive Option:

Redial Period

. If you select this option, the Router will periodically check your Internet

connection. If you are disconnected, then the Router will automatically re-establish your connection. To use
this option, click the radio button next to

Keep Alive

. In the

Redial Period

field, you specify how often you want

the Router to check the Internet connection. The default Redial Period is

30

seconds.

Figure 5-5: PPPoE Connection Type

pppoe

: a type of broadband connection that

provides authentication (username and
password) in addition to data transport

Figure 5-4: Static IP Connection Type

static ip address

: a fixed address assigned to

a computer or device connected to a network.

subnet mask

: an address code that determines

the size of the network

«
...
16
17
18
19
20
...
»

Содержание LINKSYS WRT54GX4





























































































Отзывы:

Нет отзывов

Похожие инструкции для LINKSYS WRT54GX4

UHF Wireless Series

Бренд: LD Страницы: 5

Бренд: UniFi Страницы: 22

StreamBuds Hybrid

Бренд: Mixx Страницы: 17

Бренд: Watchguard Страницы: 28

Бренд: F.F. Group Страницы: 56

Бренд: Cables to Go Страницы: 63

Бренд: Universal Scientific Industrial Co. Страницы: 19

Бренд: Planet Страницы: 8

Бренд: VKOM Страницы: 20

Бренд: Aruba Страницы: 2

YLS0056A-E080040

Бренд: THOMSON Страницы: 38

UniFi Wifi BaseStationXG

Бренд: Ubiquiti Страницы: 16

Бренд: Icidu Страницы: 16

Бренд: EE Страницы: 2

WAP54G - Wireless-G Access Point

Бренд: Linksys Страницы: 84

TEW-434APB - 54Mbps Wireless G PoE Access Point

Бренд: TRENDnet Страницы: 2

Бренд: Advantech Страницы: 46

Бренд: nedis Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды