Cisco Linksys WRK54G Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 75

background image

50

Appendix B: Wireless Security
Security Threats Facing Wireless Networks

Wireless-G Broadband Router

SSID.

There are several things to keep in mind about the SSID:

1. Disable Broadcast

2. Make it unique

3. Change it often

Most wireless networking devices will give you the option of broadcasting the SSID. While this option may be
more convenient, it allows anyone to log into your wireless network. This includes hackers. So, don’t broadcast
the SSID.

Wireless networking products come with a default SSID set by the factory. (The Linksys default SSID is “linksys”.)
Hackers know these defaults and can check these against your network. Change your SSID to something unique
and not something related to your company or the networking products you use.

Change your SSID regularly so that any hackers who have gained access to your wireless network will have to
start from the beginning in trying to break in.

MAC Addresses.

Enable MAC Address filtering. MAC Address filtering will allow you to provide access to only

those wireless nodes with certain MAC Addresses. This makes it harder for a hacker to access your network with
a random MAC Address.

WEP Encryption.

Wired Equivalent Privacy (WEP) is often looked upon as a cure-all for wireless security

concerns. This is overstating WEP’s ability. Again, this can only provide enough security to make a hacker’s job
more difficult.

There are several ways that WEP can be maximized:

1. Use the highest level of encryption possible

2. Use “Shared Key” authentication

3. Change your WEP key regularly

WPA.

Wi-Fi Protected Access (WPA) is the newest and best available standard in Wi-Fi security. Two modes are

available: Pre-Shared Key and RADIUS. Pre-Shared Key gives you one encryption methods: TKIP (Temporal Key
Integrity Protocol), which utilizes a stronger encryption method and incorporates Message Integrity Code (MIC) to
provide protection against hackers.

Important:

Always remember that each

device in your wireless network MUST use
the same encryption method and encryption
key or your wireless network will not function
properly.

«
...
54
55
56
57
58
...
»

Содержание Linksys WRK54G












































































Отзывы:

Нет отзывов

Похожие инструкции для Linksys WRK54G

Бренд: HARTING Страницы: 13

Бренд: AMX Страницы: 2

Бренд: Net Optics Страницы: 2

Бренд: Inter-m Страницы: 20

Compressor DW-CP04

Бренд: Digital Watchdog Страницы: 73

Бренд: Planet Страницы: 16

Бренд: GRASS VALLEY Страницы: 22

Бренд: Nedap Страницы: 3

BiPAC 7404V series

Бренд: Billion Страницы: 165

Бренд: IntraServer Technology Страницы: 16

Бренд: Emerson Страницы: 8

Liebert NXL 250

Бренд: Emerson Страницы: 36

Liebert SiteLink-12

Бренд: Emerson Страницы: 5

Бренд: D-Link Страницы: 127

Transistor 2SC5378

Бренд: Panasonic Страницы: 3

Switching Diodes MA6X128 (MA128)

Бренд: Panasonic Страницы: 3

Бренд: 7inova Страницы: 11

Бренд: Edimax Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды