26
Chapter 6: Configuring the Wireless-G Broadband Router
The Security Tab - VPN Passthrough
Wireless-G Broadband Router
The Security Tab - VPN Passthrough
Use the settings on this tab to allow VPN tunnels in either IPSec or PPTP protocols to pass through the Router’s
firewall.
IPSec Passthrough
. Internet Protocol Security (IPSec) is a suite of protocols used to implement secure exchange
of packets at the IP layer. To allow IPSec tunnels to pass through the Router, click the radio button beside
Enabled
. IPSec Passthrough is enabled by default. Click
Disabled
to disable the function.
PPPoE Passthrough
. Point-to-Point Protocol over Ethernet allows your PC(s) to use the PPPoE client software
provided by your ISP. Some ISPs may request that you use this feature.To allow allow PPPoE Passthrough, click
the radio button beside
Enabled
. PPPoE Passthrough is enabled by default. Click
Disabled
to disable the
function.
PPTP Passthrough
. Point-to-Point Tunneling Protocol is the method used to enable VPN sessions to a Windows
NT 4.0 or 2000 server. To allow PPTP tunnels to pass through the Router, click the radio button beside
Enabled
.
PPTP Passthrough is enabled by default. Click
Disabled
to disable the function.
Change these settings as described here and click the
Save Settings
button to apply your changes or
Cancel
Changes
to cancel your changes.
Figure 5-27: Security Tab - VPN Passthrough