Cisco Linksys E1200 Скачать руководство пользователя страница 23

Страница: 23 / 92

Product overview

Linksys E-Series

IPv6 enabled

Supports the latest Internet protocol technology to future-proof your network .

Easy to manage

Cisco Connect software helps you customize your settings and quickly add

multiple devices to your network:

Separate guest network

Create a separate, password-protected network for guests .

Parental controls

Limit access time and websites with parental controls .

Top view

Indicator light

•

Indicator light

—Stays on steadily while power is connected and

following a successful Wi-Fi Protected Setup connection . Pulses slowly

during bootup, during firmware upgrades, and during a Wi-Fi Protected

Setup connection . Flashes quickly when there is a Wi-Fi Protected Setup

error .

Back view

Ethernet ports

Wi-Fi Protected Setup button

Internet port

Power port

Reset button

USB port

•

Ethernet ports

—Connect Ethernet cables (also called network cables)

to these Gigabit (10/100/1000) ports, color coded blue, and to wired

Ethernet network devices on your network .

•

Internet port

—Connect an Ethernet cable (also called a network or

Internet cable) to this port, color coded yellow, and to your modem .

•

Wi-Fi Protected Setup™ button

—Press this button to easily configure

wireless security on Wi-Fi Protected Setup-enabled network devices .

For more information, see “How to set up wireless security using Wi-Fi

Protected Setup” on page 43 .

•

USB port

—To easily share disk storage with other users on your network

or on the Internet, connect a USB drive to this port . For more information,

see “Using an External Drive” on page 48 . You can also connect a USB

printer and share it across your network . For more information, see “How

to connect a printer” on page 18 .

•

Reset button

—Press and hold this button for 5-10 seconds (until the

port lights flash at the same time) to reset the router to its factory defaults .

You can also restore the defaults using the browser-based utility . For

more information, see “How to restore factory defaults” on page 61 .

•

Power

—Connect the included AC power adapter to this port .

CAUTIon

Use only the adapter that came with your router .

Содержание Linksys E1200





























































































Результаты поиска

Содержание Linksys E1200

Отзывы:

Похожие инструкции для Linksys E1200

Бренды по названию

Популярные бренды

Cisco Linksys E1200, Руководство пользователя

Результаты поиска

Содержание Linksys E1200

Отзывы:

Похожие инструкции для Linksys E1200

Бренды по названию

Популярные бренды