4015258 Rev B
67
How Do I Configure the Wireless Home Gateway?
Field Name
Description
Static IP
Address
Manual entry is required. Your ISP will provide the
information for you to enter into this field.
Note:
When setting a static IP address, you must enter the IP
address, subnet mask, and default gateway before the static
IP address will become operational.
Static IP Mask
Manual entry is required. Your ISP will provide the
information for you to enter into this field.
Default
Gateway
Manual entry is required, your ISP will provide the
information for you to enter into this field.
Primary DNS
(static IP only)
Manual entry is required. Your ISP will provide the
information for you to enter into this field.
Secondary DNS
(static IP only)
Manual entry is required. Your ISP will provide the
information for you to enter into this field.
Function Keys
The following function keys appear on the Setup Basic Settings - Network
Configuration page.
Key
Description
Renew WAN
IP Address
Lease
Forces a release and renewal of your WAN IP address
Apply
Saves the values you enter into the fields without closing the
screen
Configuring and Managing IP Addresses
Use the Setup Basic Settings - IP Management page to configure how your system
manages and assigns IP addresses in your network.
Note:
If you are not familiar with the IP management procedures detailed in this
section, contact your cable service provider before you attempt to change any of the
wireless home gateway default IP management settings.
Click
LAN IP Address Management
in the Basic Settings section of the Setup page
to access the Setup Basic Settings - IP Management page.