4015258 Rev B
77
How Do I Configure the Wireless Home Gateway?
Setup Advanced Settings - IP Filtering Page Description
Use this page to specify and enable a range of IP addresses that cannot have access
to the Internet. Click
Apply
to apply and save your new IP address filter settings.
Configuring MAC Address Filters
Use the Setup Advanced Settings - MAC Filtering page to configure MAC address
filters. These filters allow you to deny or block access to the Internet by the
individual MAC addresses listed in the table. You can also prevent individual PCs
from sending outgoing TCP/UDP traffic to the WAN using their MAC address.
Note:
If you are not familiar with the advanced settings detailed in this section,
contact your cable service provider before you attempt to change any of the wireless
home gateway default advanced MAC filtering settings.
Click
MAC Address Filtering
in the Advanced Settings section of the Setup page to
access the Setup Advanced Settings - MAC Filtering page.
