Cisco DX650, Руководство администратора

Страница: 147 / 230

Default Description Feature
PIN
For more information, see the
Screen Lock and Automatic Lock
Setup, on page 139
.
Indicates whether screen lock is required on
the device. Options:
• User controlled.
• PIN - A numeric password that is at least
four digits long.
• Password - An alphanumeric password,
consisting of at least four alphanumeric
characters, one of which must be a
non-numeric character, and one must be
a capital letter.
Require Screen Lock
Default: 600
Minimum: 15
Maximum: 1800
For more information, see the
Screen Lock and Automatic Lock
Setup, on page 139
.
Indicates maximum idle time in seconds before
the device automatically locks the screen. After
the screen is locked, the user password is
required to unlock it Maximum Screen
Lock Timeout
Disabled Allows the administrator to lock the device to
prevent unauthorized user access. Lock Device
Disabled Allows the administrator to erase the user data
and configuration on the device. Wipe Device
Maximum length: 256 Authentication realm for web proxy Kerberos. Kerberos Realm
Hostname or the IP address of local
server.
Maximum length: 256.
Indicates that the device will use an alternative
server to obtain firmware loads and upgrades,
rather than the defined TFTP server. Load Server
Enabled Enables or disables Peer to Peer image
distribution in order to allow a single device
in a subnet to retrieve an image firmware file
and then distribute it to its peers. Peer Firmware
Sharing
IP address of remote system
Maximum length: 32.
Specifies an IP address and port of a remote
system to which log messages are sent. Log Server
Disabled Indicates whether the device will accept
connections from a web browser or other
HTTP client. Web Access
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
129
Configure Product-Specific Options