Cisco D9859, Руководство по установке и настройке

Страница: 231 / 390

Configuring Transport Stream Information
OL-31980-01 207
If a conflict occurs, a message that the conflicts will be fixed automatically and to
preview the changes prior to saving is displayed. Click
View Conflicts to view a
detailed list of all the conflicts in the Output Channel and PID Conflicts
window.

For channel conflicts, the system will only automatically change the
duplicated output channel numbers. If both PE actions are set to
Map or
XCode , the output channel number of the higher PE is changed. Otherwise,
the output channel number of the mapped and transcoded PE is changed.
The new channel number selected is the next channel number that does not
appear in the current PAT or belong to any other PEs.

For PID conflicts, the system will only automatically change the duplicated
output PID numbers. If both PE actions are set to
Map or XCode , the output
PID number of the higher PE is changed. Otherwise, the output PID number
of the mapped or transcoded PE is changed. For example, if the PMT PID of
PE1 matches the ES PID of PE2, the ES PID of PE2 is changed. The new PID
number selected is the next number that does not appear in the output of any
PE and it is not in the current transport input.
Click Apply to save the resolved conflict changes.
Setting the DPM General Settings
1 In the DPM General Settings area, you can configure MPEGoIP DPM transport
stream settings.
2 From the Remapping Mode drop-down list, choose the DPM map mode. The
following table describes each mode:
Map Mode Description
Svc ID The elementary PIDs are not changed. Channels are remapped by
changing their PSI references. When this mode is selected, PE
detailed PID mapping cannot be edited.
Svc ID & PID Channels and the elementary service PIDs can be mapped.