Cisco D9859, Руководство по установке и настройке

Страница: 213 / 390

Configuring Transport Stream Information
OL-31980-01 189
If you want to configure an auxiliary PE, we highly recommend that you
perform the following:
-
From the Enable Auto Map For Auxiliary PEs drop-down list, choose Yes in
the ASI Outputs page.
-
Set PxA to Map .
-
Click Resynchronize All to ensure that the inputs and outputs are the same .
4 Select the program entry you want to edit.
5 Click Edit . The DPM PE PID MAP window opens.
6 In the Output Channel # field, enter the output channel number you want to
map to the input channel ( Input Channel # ). This value is only used if the PE
Action is set to Map . You can enter a range from 1 to 65535.
7 In the Output PMT PID field, enter the output PMT PID number you want to
map to the Input PMT PID.
8 In the PE PID MAP area, you can select an existing PID mapping entry you want
to modify or click Add Row to create a new entry.
9 The Input Stream indicates the input service that will be mapped by the current
entry. The Input PID displays the input PID (1 to 8190) that will be mapped by
the current entry. This is only used if the Action is set to Map.
10 From the Action drop-down list, choose the action to perform on the current
PID. The Drop action is always performed, but the Map option is only applied if
the PE Action is Map and the Remapping Mode is Svc ID & PID in the DPM
General Settings area.