26
Chapter 5: Configuring the Switch through the Web Utility
VLAN Tab
24-port 10/100 + 2-Port Gigabit Switch with WebView
QoS Configuration
This screen allows you to configure the QoS. Select the
QoS Mode
of
High Low = 3:1
,
Disable QoS Priority
,
High
Empty Then Low
,
High Low = 3:1
,
High Low = 5:1
,
High Low = 7:1
from the drop-down menu. Select the
Static Port Ingress Priority
of
High
or
Low
from the drop-down menu, for the port you want to configure. Select
Off
for the port to remain unchanged. For
802/1p Priority [7-0]
, select from
0
to
7
, then select
High
or
Low
from
the drop-down menu.
Click
Apply
to save the changes.
Logout Tab
Click
Logout OK
to logout. Click
back
to go to the previous screen.
Figure 5-16: QoS Configuration
Figure 5-17: Logout Tab
