23
Chapter 5: Configuring the Switch through the Web Utility
Trunk Tab
24-port 10/100 + 2-Port Gigabit Switch with WebView
Trunk Tab
This tab allows you to configure the trunk group. Select the port, then select if it is a normal port, then select the
group you want to add the port to.
Click Apply when finished with your changes.
VLAN Tab
VLAN Configuration
This tab allows you to configure the VLAN feature.
To configure the VLAN, select
PortBased
or
802.1Q
from the drop-down menu. To disable this feature, select
Disable
. I
802.1Q VLAN Mode
The VLAN Group list will display the existing VLAN groups. To add a VLAN group, click
Add New
. To delete a group
from the list, click
Delete
. Click
Click Advanced 802.1Q VLAN Setting
to change settings.
Click
Apply
to save the changes.
Figure 5-9: Trunk Configuration
Figure 5-10: 802.1Q VLAN