18
Chapter 4: Configuration using the Console Interface
Configuring the Switch through the Console Interface
24-port 10/100 + 2-Port Gigabit Switch with WebView
Port Status
This screen allows you to view the status of a port. The Port, Enable, Link Status, Spd/Dpx, and Flow Control are
displayed.
Port Configuration
This screen allows you to change the status of a port. Select the port, then
Enable
the port you want to configure
or
Disable
if you don’t. For the Speed/Duplex, enter
10 Half
,
10 Full
,
100 Half
,
100 Full,
or
Auto
for Auto MDI/
MDIX. For Flow Control, select
On
to control the flow of the packet transmission or
Off
.
Logout
Select Logout to log out of the console configuration utility.
Figure 4-19: Port Status
Figure 4-20: Port Configuration
Figure 4-21: Logout
