Cisco Cisco 7940, Руководство пользователя

Страница: 85 / 186

Dial-in Setup of Remote Phone
Cisco 7960/7940 Telephone User Guide System Telephone Features 73
620-05600070B
Phone and advises you to hang up the phone and try again. Until you
hang up the phone and disconnect from the Remote Phone feature,
you will receive the announcement.
There are two ways to enable the Remote Phone feature:
•
by dialing a special DID number, or
•
through the Web Portal under Options > Remote
Dial-in Setup of Remote Phone
To set up a remote phone by dialing in, you must call using the remote phone where
your VoIP phone calls will be forwarded.
1. From the remote phone (example, your cell phone or a hotel phone), dial the
Remote Phone access DID number.
Your service provider should have provided this number to you.
2. Enter the phone number of your VoIP phone followed by the pound sign ( # ).
EXAMPLE: 9723353421# or 9723352100*2001# for Non-DID numbers.
3. Enter the password for your VoIP phone followed by # .
4. DO NOT hang up the destination phone. Leave it off-hook.
5. If a call comes in, press star ( * ) to answer the call.
6. Disconnect from a call by pressing “ ### ”, which will leave the Remote Phone
active (you will hear hold music playing).
NOTE: Be aware that if you are using a cell phone, the phone is still in an active call.
Deactivating Dial-up Remote Phone
If you hang up the remote phone, it will disconnect the call and deactivate the
Remote Phone mode.
Web Portal Setup of Remote Phone
The remote phone feature can be activated via the Web Portal by selecting
Options > Remote . You must check the box labeled Enable Remote User , then
enter the phone number of the remote phone (for example, a cell phone or hotel
phone number).