1-5
Cisco Content Engine 500 Series Hardware Installation Guide
78-11199-03
Chapter 1
Introducing the Content Engine
Introduction
Content Engine 560AV and 507AV
The Content Engine 560AV (CE-560AV) and the Content Engine 507AV
(CE-507AV) are configured for AC-input power and have a single AC-input
power supply. The CE-560AV and CE-507AV have two 10/100BASE-T
Ethernet/Fast Ethernet ports with RJ-45 receptacles. Port Ethernet 0 supports
autodetect speed mode and full-duplex operation. The second port (Ethernet 1) is
supported in ACNS 4.0.3 software and later releases.
The CE-560AV and CE-507AV have one internal Ultra2 LVD SCSI hard drive and
one analog audio and video card.
Figure 1-1
shows the Content Engine 560AV and 507AV front panel with an
analog audio and video card installed in slot 0, and
Figure 1-2
shows the analog
audio and video card cabling.
Figure 1-1
Content Engine 560AV and 507AV
LINK
CONS
ETHERNET 0
ETHERNET 1
SCSI LVD ONL
Y
100Mbps
LINK 100Mbps
SLOT 0
SLOT 0
AUDIO OUT
VIDEO OUT
SLOT 1
SLOT 1
0 1 2 3
33193
Console port
Audio out
Video out
55046
