1-13
Cisco Content Engine 500 Series Hardware Installation Guide
78-11199-03
Chapter 1
Introducing the Content Engine
System Hardware Features
Cables and Connectors
This section describes the cables and connectors that connect your
Content Engine to a terminal and to the external network.
Console Cable
The Content Engine comes with a console cable kit that includes the following
cable and adapters:
•
One RJ-45 to RJ-45 rollover cable
•
Two RJ-45 to DB-9 adapters
Use the rollover cable to connect the Content Engine console port to the COM
port of an ASCII terminal or a PC running terminal emulation software. The
console port on the Content Engine is configured as data terminal equipment
(DTE) and uses an RJ-45 connector.
By attaching an RJ-45 to DB-9 adapter to the rollover cable, you create an RJ-45
to DB-9 null modem cable.
Slot 1
Green
On
There is no drive installed in Slot 1.
Off
The drive in Slot 1 is not active.
Flashing
The drive in Slot 1 is active.
Status 0 1 2 3
LEDs
Green
Steady
In a steady display, the state of each LED is
constant. (See
Table 3-1
for the meanings of
steady-state LED variations.)
Rolling
Reboot has begun.
In a rolling display, the four LEDs give the
appearance of a light that repeatedly moves
from left to right.
Table 1-7
LEDs (continued)
Indicator
Color
State
Description
