Chapter 1
Introducing the Content Engine
System Hardware Features
1-12
Cisco Content Engine 500 Series Hardware Installation Guide
78-11199-03
Warning
To avoid electric shock, do not connect safety extra-low voltage (SELV)
circuits to telephone-network voltage (TNV) circuits. LAN ports contain
SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN
ports both use RJ-45 connectors. Use caution when connecting cables.
Table 1-7
describes the LEDs on the front panel.
Slot 0
Bay for hard drive 0 or analog audio and video card
(CE-507AV or CE-560AV only).
Slot 1
Bay for hard drive 1.
Back Panel
Power receptacle
AC or DC. The power cord connects to this plug.
Power switch
This switch toggles between on and off.
A power light on the front panel, when lit, indicates
that the power is on.
Table 1-6
Ports and Receptacles (continued)
Item
Description
Table 1-7
LEDs
Indicator
Color
State
Description
Power
Green
On
Power is flowing to the Content Engine.
System
Green
On
The network connection is active (packets
are being sent or received).
LINK
Green
On
The Content Engine is connected to the
network.
100 Mbps
Green
On
The connection is a 100BASE-TX (Fast
Ethernet) connection.
Slot 0
Green
On
There is no drive installed in Slot 0.
Off
The drive in Slot 0 is not active.
Flashing
The drive in Slot 0 is active.
