12 - 238
CCNA 2: Routers and Routing Basics v3.1 Instructor Guide – Module 1
Copyright
©
2004, Cisco Systems, Inc.
•
Memory
•
Interfaces
However, the main purpose of a router is to route, not to compute. The main components of
the router are as follows:
•
RAM
•
NVRAM
•
Flash
•
ROM
•
Interfaces
The following topics should be covered in this TI:
•
Discuss the similarities of computers and routers such as the software they use.
•
Explain the components of the router and what each component contains.
•
Open a router and let the students examine the inside. Point out the main
components.
•
Explain that just as a computer cannot work without an operating system and
software, a router cannot work without an operating system and configurations.
1.1.3 Router LANs and WANs
Routers function in both LANs and WANs. They are primarily used in WANs. Explain that
routers have both LAN and WAN interfaces. Students should be able to identify the
differences. The two main functions of a router are to select the best path and to forward
packets to the correct outgoing interfaces.
Networking models are useful because they facilitate modularity, flexibility, and adaptability.
Like the OSI model, the three-layer design model is an abstract picture of a network. Models
may be difficult to comprehend because the exact composition of each layer varies from
network to network.
Explain that each layer of a three-layer design model may include a router, a switch, a link, or
some combination of these. Some networks may combine the function of two layers into a
single device or may omit a layer entirely. The three-layer design model consists of the
following:
•
The core layer forwards packets as quickly as possible.
•
The distribution layer provides a boundary by using filters to limit what gets to the
core.
•
The access layer feeds traffic into the network and controls entry into the network.
