Cisco Catalyst Blade 3032, Руководство по настройке программного обеспечения

Страница: 862 / 1380

37-42
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-06
Chapter 37 Configuring QoS
Configuring Standard QoS
Configuring Classification Using Port Trust States
These sections describe how to classify incoming traffic by using port trust states. Depending on your
network configuration, you must perform one or more of these tasks or one or more of the tasks in the
“Configuring a QoS Policy” section on page 37-48 :
•
Configuring the Trust State on Ports within the QoS Domain, page 37-42
• Configuring the CoS Value for an Interface, page 37-43
•
Configuring a Trusted Boundary to Ensure Port Security, page 37-44
• Enabling DSCP Transparency Mode, page 37-46
•
Configuring the DSCP Trust State on a Port Bordering Another QoS Domain, page 37-46
Configuring the Trust State on Ports within the QoS Domain
Packets entering a QoS domain are classified at the edge of the QoS domain. When the packets are
classified at the edge, the switch port within the QoS domain can be configured to one of the trusted
states because there is no need to classify the packets at every switch within the QoS domain.
Figure 37-11 shows a sample network topology.
Figure 37-11 Port Trusted States within the QoS Domain
201781
Trunk
Trusted interface
Traffic classification
performed here
Trusted boundary
P1 P3