manualshive.com logo in svg

Cisco Catalyst 3040, Руководство по установке оборудования

Поделиться
Скачать
Cisco Catalyst 3040 Скачать руководство пользователя страница 28

 

2-6

Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide

OL-10694-01

Chapter 2      Blade Switch Installation

  Overview of Steps for Installing and Initially Configuring the Blade Switch

Consider these requirements before you install your blade switch:

•

The NET1 and NET2 slots are a pair. If the NET2 slot is used, the I/O blade in the NET2 slot must 
be the same type as the one in the NET1 slot.

•

The NET3 and NET4 slots are a pair. If the NET4 slot is used, the I/O blade in the NET4 slot must 
be the same type as the one in the NET3 slot.

•

If the blade switch is installed in the NET3 and NET4 slots, an Ethernet I/O module (daughter card) 
must be installed on the BX600 server.

For more information about the components of the BX600 system, see the 

PRIMERGY BX600 Basic Unit 

Operating Manual

.

Overview of Steps for Installing and Initially Configuring the 
Blade Switch

You can install and configure the blade switch by using either of two methods. In each, you start a 
terminal-emulation program on a PC. The terminal-emulation software—a PC application such as 
Hyperterminal or ProcommPlus—makes communication between the blade switch and your PC or 
terminal possible. The PC communicates with the blade switch either through its console port or through 
the console port of BX600 system management blade. 

•

To set up the blade switch through its console port, start with the next section, “

Installing the Blade 

Switch in the BX600 System

.”

•

To set up the blade switch through the BX600 system management blade, first connect it to a PC to 
run the terminal emulation program and to interact with the console menu. Do this before you install 
the blade switch into the BX600 system. Start with the “

Connecting through the BX600 System 

Management Blade

” section on page 13. 

Installing the Blade Switch in the BX600 System

Follow these steps to install the blade switch in the BX600 system:

Step 1

Obtain and make note of this information from your system administrator before you begin the blade 
switch installation: 

•

Switch IP address

•

Subnet mask (IP netmask)

•

Default gateway (router)

•

Enable secret password (encrypted)

•

Enable password (not encrypted)

•

Telnet password

•

SNMP community strings (optional)

Step 2

Touch the blade switch static-protective package to unpainted metal on the BX600 system for at least 2 
seconds.

Step 3

Remove any dummy blade from the slot.

Содержание Catalyst 3040





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды